1. We provide 2 years warranty for this model
2. The price for this machine is not include customer's local tax
3. Please read the words for the accessories and parameters before you place an order, Make sure it is what you want
4. Please contact us before you open a dispute or leave a negative feedback if you have any problem, We will try our best to help you.
Plasma cutting machine HC8000/CUT80NPi is developed by HeroCut in USA Branch, On rear of machine have CNC port, Can easy with CNC system. Non-HF pilot arc Heavy Duty efficient Digital controller. This machine is single phase inverter cutting machines on the market. With quality torch fixed safety plasma plug, The fast connection quick to release torch and ground clamp. The machine is easy to operate in terms of settings, Display show cutting amps help user adjust the current to cut different metal. Cutting thickness for this machine is 25mm at 70 psi with good performance, Max cutting thickness can reach at 30mm if needed for a short run. Torch standoff and 5 set of consumables included.
- IPT80 High quality plasma cutting torch with 5 meters cable
- Digital display, Air pressure Display, 2T/4T, Air Check / Cutting function.
- Inverter 80Amps power supply, 60% Duty cycle at 80amps, 100% at 70amp
- IGBT Technology Non-HF Pilot Arc No Touch, With CNC port, Can easy with CNC system.
- IPT80 Non-HF Pilot Arc Cutting torch with 5 meters cable
- Earth clamp with 5 meters cable
- 2 meters air hose
- 2 pcs hose clamp
- 5 pcs #1.0 tips
- 5 pcs #1.1 tips
- 5 pcs electrodes
- 2 pcs CNC Female Connector
| Input power voltage
| Rated input power capacity
| Input voltage frequency
| No-load voltage
| Output current range
| Rated output voltage
| Duty-cycle (35℃)
| No-load loss
| Power factor
| Insulation class
| Protection class
| Max.Cutting thickness
| Air flow